Bringing a metal manufacturing plant right at your construction site may sound impossible, but it's now a reality. You can now call in portable roll forming machinery onsite, which helps produce construction materials, such as roofing and sidings.
In these processes, steel coils are fed into a particular machine featuring multiple rollers. Here, they are forged into metallic panels as per your desired specifications. After that, your contractor can choose to store them for later use or immediately use them in the roofing project.
Interestingly, you receive the same metal panel qualities as those produced from a factory setup. Get to learn more about the advantages of onsite roll forming for your construction project below.
Achieve a Weathertight Roof With Fewer Seams
When you opt for a standing seam roof, you can minimize the number of seams using onsite metal forming. Besides, onsite metal forming helps achieve more expansive panels than the pre-made factory units. If you need long metal panels for your standing seam roof, onsite roll forming helps minimize the number of seams. Consequently, that allows for a weathertight roof fitting due to fewer or no water seepage spaces, minimizing water damage.
Eliminates Packaging and Shipment Costs
Onsite roll forming is also advantageous since it gets rid of packaging and shipment costs. That's significantly helpful when you need a considerably large number of roofing panels for any particular project since shipment costs rise with larger orders. Additionally, onsite metal forming removes any possibility of product damage during shipment because they are manufactured on the construction site.
Onsite metal roll forming saves more time since you don't have to wait for shipment arrival. The panel manufacturing process starts no sooner than your metal roll forming company arrives at the construction site. The panel forming process is usually swift but might depend on the type of machinery the provider uses. With onsite roll forming, you save more time on projects because there is no unpacking required. You can get them directly from the forming machine straight to the roof, which saves more time.
Can Serve Both Commercial and Residential Projects
Onsite roll forming can be advantageous for both industrial and domestic projects of any scale and magnitude. However, a crucial aspect you must pay attention to is site accessibility for the roll-forming machines.
Finally, you might also want to look into other support equipment such as cranes, forklifts, or ramps, which are essential in ensuring safe handling and hoisting of the panels to the roof. Consult your construction contractor and roll forming specialists for advice on space and access requirements for the onsite roll forming project. They can provide more information regarding commercial forming.Share